SEARCH RESULT

VIEW IN

Search result for 'cer'

Digital Torque Tester

• Integral Transducer and sturdy housing allow mounting in virtually any position

• Integral Transducer: Full bridge strain gage, 350 ohm, 1500uE, 3mV/V F.S, 3.75 excitation

• Units of Torque: Nm, kg.cm., ft.lb., in.lb., in.oz.

• Audible (tone)

• Torque Accuracy: ± 0.5% ± 1% count CW and CCW from 10% to 100% of full scale at 25° C

• LCD Touch Screen: 4.7 inch color graphics display

• Screen resolution: 480 X 272 pixels

• Display Accuracy: 4 digits, 500 cycle counts

• 6 “AA” Alkaline cells for battery power included

• Track, Peak and First Peak modes of operation

• Operating Temperature: 40° to 110° F (5° to 42° C)

• Storage Temperature: 0° to 122° F (-20° to 50° C)

• Humidity up to 85% non-condensing

• ISO-6789-2003 and ASME B107-28-2005 standards compliant

• Certificate of N.I.S.T. traceability from 10% to 100% of full scale

• Includes storage case, AC adapter and USB cable 110v - 220v

• Dates & times, serial numbers, required accuracy vs actual readings, percentage error & users of torque wrenches tested are stored

Quantity

More Detail

COMPUTORQ 3 Digital Torque Wrench

• Sleek new design

• 15˚ flex ratcheting head

• Push button socket release head

• Large, easy to read digital display

• Long battery life, uses 2 each CR123 lithium batteries

• Ergonomically designed molded non-slip rubber grip

• Torques in both clockwise and counterclockwise directions

• Battery saving auto-shutoff after two minutes

• COMPUTORQ 3 remembers last unit and torque setting selected

• Audible tone sounds when set torque value is reached, if the set torque value is exceeded, an alarm tone will sound

• 3 color LED light bar:

YELLOW LED indicates approaching desired torque setting

GREEN LED indicates desired torque value is reached

RED LED indicates fastener was overtorqued, loosen and retighten

• When desired torque value is reached, display will hold value and flash for ten seconds

• COMPUTORQ 3 will operate in any of four torque units, foot pound (ft.lb.), inch pound (in.lb.), newton meter (Nm)

or kilogram centimeter (kg.cm.)

• ACCURACY:

± 2% CW of readings from 10% to 100% of full scale

± 3% CCW of readings from 20% to 100% of full scale

• N.I.S.T. traceable certificate of calibration included

• Meets or exceeds ASME B107.28 - 2005

Quantity

More Detail

Preset Click-Type Torque Wrench, Interchangeable Head

• 8 models available with torque ranges from 10 in.lb. to 600 ft.lb.

• Featuring a durable, non-slip cushion grip

• Uses universal round shank heads

• Audible click and feel impulse torque control mechanism

• Tamper proof torque setting for production line use

• Torque values can be calibrated in English or metric setting

• Accuracy: ± 4% of indicated value, from 20% to 100% of full scale

• Meets or exceeds ASME B107.14-2004, ISO 6789

• Optional Calibration certificate available at additional cost

Quantity

More Detail

Adjustable Click-Type Torque Wrench(Dual scale)

• Dual scale, calibrated dual direction

• Positive lock with spring loaded pull down lock ring

• Fast, accurate and easy to set

• Easy-to-read laser marked scales

• Most feature quick release buttons which provide good socket retention as well as easy socket removal

• Accuracy: ± 4% CW ± 6% CCW of indicated value, CW, from 20% to 100% of full scale

• Meets or exceeds ASME B107.14-2004, ISO 6789 standards

• Individually serialized with matching certificate of calibration traceable to N.I.S.T.

Quantity

More Detail

1/2" Insulated Extension Bars

• Tools are VDE certified with certificate

• Made from high impact resistance injection for increased

connection for torque

• Insulation material are anti-burn with high low temperature

resistance

• Test up-to 10000v with GS/VDE certification IEC 60900:2012

Quantity

More Detail

Insulated Ring wrench

• Tools are VDE certified with certificate

• Made from high impact resistance injection for increased

connection for torque

• Insulation material are anti-burn with high low temperature

resistance

• Test up-to 10000v with GS/VDE certification IEC 60900:2012

Quantity

More Detail

Insulated Open End Wrench

• Tools are VDE certified with certificate

• Made from high impact resistance injection for increased

connection for torque

• Insulation material are anti-burn with high low temperature

resistance

• Test up-to 10000v with GS/VDE certification IEC 60900:2012

Quantity

More Detail

Insulated Ratcheting Wrench

• Tools are VDE certified with certificate

• Made from high impact resistance injection for increased

connection for torque

• Insulation material are anti-burn with high low temperature

resistance

• Test up-to 10000v with GS/VDE certification IEC 60900:2012

Quantity

More Detail

Insulated Hex Key

• Tools are VDE certified with certificate

• Made from high impact resistance injection for increased

connection for torque

• Insulation material are anti-burn with high low temperature

resistance

• Test up-to 10000v with GS/VDE certification IEC 60900:2012

Quantity

More Detail

Insulated Series, Phillips®

• Insulated screwdriver for Phillips® PH-head screws, for work on

live equipment up to 1000V

• Examination of screwdrivers according to latest national and

international standards

• Examination piece-wise in water bath with 10 KV

• Ergonomically developed 2-component handle

• Blade black oxidized, entirely hardened

• Manufactured according to

- IEC60900 Standard

- VDE Certified

- GS Certified

Quantity

More Detail

Insulated Series, Slotted

• Insulated screwdriver for slotted screws, for work on live

equipment up to 1000V

• Examination of screwdrivers according to latest national and

international standards

• Examination piece-wise in water bath with 10 KV

• Ergonomically developed 2-component handle

• Blade black oxidized, entirely hardened

• Manufactured according to

- IEC60900 Standard

- VDE Certified

- GS Certified

Quantity

More Detail

Miniature Circlip Pliers, 90o

BCER5/BCER6

Miniature Circlip Pliers, 90o

BCER5/BCER6

• Dual compound soft grip handles provide good grip and comfort

• Precise machined joint for ease of use and longer life

• Drop forged chrome/nickel alloy is fine polished for corrosion resistant finish

Quantity

More Detail